Food Grade Factory Price Ene L-Qb300 Hydrogenated Synthetic Heat Transfer Fluid Thermal Fluid Widely Used in Csp

One of the reasons we produce high-quality Fire Suppression Solutions, Hfc 227 Gas, Clean Agent Gas is our quality inspection system, which is the best of its kind. We are recognized by the industry for our integrity, strength and excellent product quality, along with compliments from our customers and friends across the country! We have always regarded talents as the foundation for supporting the development of the enterprise and attached great importance to talent training. We will try our best to satisfy your requirements with high quality goods, the best prices and prompt delivery. Our corporate spirit has evolved over the years but remains the same, always maintaining the common characteristics of responsibility, advancement and transcendence.

◆ Introduction:

Noah®7300 heat transfer fluid is a clear, colorless, odorless fluid that has utility in a wide variety of applications, including heat transfer, lubricant deposition, electronic testing and cleaning applications.

Noah®7300 heat transfer fluid , a segregated hydrofluoroether, is non-flammable, thermally stable, non-ozone depleting, and has a very low global warming potential. Noah®7300 fluid does not contribute to the formation of photochemical smog. The product is recommended for use as a replacement for perfluoropolyethers (PFPEs), perfluorocarbons (PFCs), hydrochlorofluorocarbons (HCFCs), and hydrofluorocarbons (HFCs). On this basis, Noah®7300 fluid provides a useful tool to help meet commitments for greenhouse gas emission reduction.

The boiling point, wide liquid range and low-temperature viscosity of Noah®7300 fluid make it ideal for cooling ion implanters, dry etchers, and CVD machines. Noah®7300 fluid is effective at mitigating the aggressiveness of solvents and is useful in inerting the flammability of blends. The chemical and thermal stability of Noah®7300 fluid lend to its use as a reaction media.

◆Product Features:

------colorless, odorless, non-toxic, safe and non-flammable, good solubility, insoluble in water, good thermal stability;

------non-ozone depleting, quite low damage to the ozone layer and a very low global warming potential;

------low surface tension, low viscosity;

------Low latent heat of evaporation, excellent material compatibility;

------Good insulation performance, non-conductive, and will not cause damage to electronic equipment

◆Advantages:

Since the performance is closest to CFCs, the formal cleaning equipment can still be used, without increasing equipment investment, and without major changes to the process.

◆Physical properties of Noah^®7300:

Appearance	Clean，colorless
Molecular weight	350
Boiling point	98.0℃
Decomposition temperature	>200 ℃
Liquid density (25℃)	1.66g/mL
Freezing point	-38℃
Vapor density	0.014g/mL（25℃）
Flash point	No flash point
Heat of Vaporization	97.99 kJ/kg
Thermal conductivity (25℃)	0.062 W/(m•K)
Vapor Pressure（20℃）	5.9kPa
Kinematic viscosity (25℃) (25℃)	0.94cSt
Specific heat	1.14kJ/kg•℃
Dielectric loss	0.000143
Evaporation rate	0.07
Surface Tension	17mN/m
Heat of vaporization	34.3kJ/mol
Standard enthalpy	3315.36kJ/mol
Dielectric constant	7.76
Thermal conductivity	0.062W/m.K
Resistivity	≧1*10^11Ω·mm
Dielectric strength range (2.5mm)	>25kV
Percentage of volatile substances	100 %
Auto-ignition temperature	408 ℃
LC50	430,000mg/m3
GWP	200
ODP	0

◆Scope of product use:

1. Cleaning agent, rinsing agent, anhydrous fluid, defluxing agent and heat transfer medium;

2. Cleaning of electronic instruments and laser discs, removal of particles and debris;

3. Optical system and precision parts cleaning;

4. Used in the cleaning of precision electronic instruments and medical equipment. It is mainly used in the cleaning of precision electronic instruments and medical equipment.

5. Solvent thinner, lubricant thinner, special purpose solvent, etc.

6. Precision refrigerant, evaporative cooling refrigerant.

7. Reaction solvent

◆Safety and precautions:

1. It is necessary to comply with the local regulations on normal protection of chemical handling and industrial hygiene, and do not inhale thermal decomposition products. Avoid skin contact with hot substances.

2. Do not eat, drink or smoke when using this product. Wash thoroughly after operation. Avoid release to the environment. Avoid contact with oxidants (such as chlorine, chromic acid, etc.).

3. When using this product, you should follow the information and recommendations provided in our "Chemical Safety Data Sheet". The precautions needed to handle chemicals should also be handled.

4. When using this product, ensure good indoor ventilation.

FAQ

Quality control

We have a strict quality control system, Professional QC team.

 

Custom packaging service

We can customize the package and label.

 

Quick response

All requests will be replied within 12 hours.

Hot Tags: heat transfer fluid, China, suppliers, manufacturers, in stock, made in China, UL Listed And FM Approved FK5112, REACH Registered FK5112, Gaseous Fire Suppression, Fire Suppression Gas, UL Listed FK-5-1-12, Hfc-227

For technology, we tirelessly pursue breakthroughs, put customer needs first, and strive to develop new Food Grade Factory Price Ene L-Qb300 Hydrogenated Synthetic Heat Transfer Fluid Thermal Fluid Widely Used in Csp. We are always committed to the all-round management of 'creating excellence and sharing brilliance', vigorously promote brand building, implement international business strategy, and keep pace with the times. In the future, we will continue to work hard to improve product performance and quality according to customer needs. We sincerely look forward to your guidance and support.