Introduction：
In today's rapidly changing regulatory and competitive environment, it is a challenge to find a cleaning solvent with performance, compatibility and cleaning strength that can meet the application requirements. The ideal solution should not only provides strong cleaning performance, but also provides low environmental impact and high safety margins. And Noah®7300 has such excellent environmental protection and safety performance. Noah®7300's boiling point, wide liquid temperature and low temperature viscosity make it an ideal choice for cooling ion implanters, dry etchers and CVD machines and data center immersion cooling. Noah®7300 fluid can effectively reduce the corrosiveness of solvents and can also effectively inert the flammability of the mixture. In addition, the chemical and thermal stability of Noah®7300 fluid helps it to be used as a reaction medium.
Product Features:
------colorless, odorless, non-toxic, safe and non-flammable, good solubility, insoluble in water, good thermal stability;
------non-ozone depleting, quite low damage to the ozone layer and a very low global warming potential;
------low surface tension, low viscosity;
------Low latent heat of evaporation, excellent material compatibility;
------Good insulation performance, non-conductive, and will not cause damage to electronic equipment
Advantages: Since the performance is closest to CFCs, the formal cleaning equipment can still be used, without increasing equipment investment, and without major changes to the process.
◆Physical properties of Noah®7300:
Appearance | Clean，colorless |
Molecular weight | 350 |
Boiling point | 98.0℃ |
Decomposition temperature | >200 ℃ |
Liquid density (25℃) | 1.66g/mL |
Freezing point | -38℃ |
Vapor density | 0.014g/mL（25℃） |
Flash point | No flash point |
Heat of Vaporization | 97.99 kJ/kg |
Thermal conductivity (25℃) | 0.062 W/(m•K) |
Vapor Pressure（20℃） | 5.9kPa |
Kinematic viscosity (25℃) (25℃) | 0.94cSt |
Specific heat | 1.14kJ/kg•℃ |
Dielectric loss | 0.000143 |
Evaporation rate | 0.07 |
Surface Tension | 17mN/m |
Heat of vaporization | 34.3kJ/mol |
Standard enthalpy | 3315.36kJ/mol |
Dielectric constant | 7.76 |
Thermal conductivity | 0.062W/m.K |
Resistivity | ≧1*10^11Ω·mm |
Dielectric strength range (2.5mm) | >25kV |
Percentage of volatile substances | 100 % |
Auto-ignition temperature | 408 ℃ |
LC50 | 430,000mg/m3 |
GWP | 200 |
ODP | 0 |
Scope of product use:
1. Cleaning agent, rinsing agent, anhydrous fluid, defluxing agent and heat transfer medium;
2. Cleaning of electronic instruments and laser discs, removal of particles and debris;
3. Optical system and precision parts cleaning;
4. Used in the cleaning of precision electronic instruments and medical equipment. It is mainly used in the cleaning of precision electronic instruments and medical equipment.
5. Solvent thinner, lubricant thinner, special purpose solvent, etc.
6. Precision refrigerant, evaporative cooling refrigerant.
7. Reaction solvent
8. data center immersion cooling
Materials Compatibility
Due to its high stability, general materials are suitable except for strong alkali, strong acid and strong reducing agent. To be on the safe side, it is recommended that users do compatibility testing and overall evaluation before applying it to production.
Safety and precautions:
Be sure to read and follow the precautions and directions for use contained in the product label and Material Safety Data Sheet before using this product. Noah®7300 fluid is nonflammable and is highly resistant to thermal breakdown and hydrolysis in storage and during use. Recommended handling procedures are provided in the Material Safety Data Sheet. A product Material Safety Data Sheet is available upon request from Noah.
FAQ
Quick response
All requests will be replied within 12 hours.
How long i can get the feedback after we sent the enquiry?
We will reply you within 12 hours in working day.
Hot Tags: data center immersion cooling, China, suppliers, manufacturers, in stock, made in China