◆Introduction:
FK-5-1-12 suppression agent is the most eco-friendly chemical clean agent available.
◆Physical properties of Noah®5112:
Molecular mass | 316.045 |
Boiling point at 1atm | 49.2℃ |
Freezing point | -108℃ |
Critical temperature | 168.7℃ |
Critical pressure | 18.65 Bar |
Critical density | 639.1 kg/m3 |
Heat of vaporization at boiling point | 88.0 kJ/kg |
Liquid Viscosity @25℃ | 0.524 cp |
Solubility of water in Noah5112 @25℃ | <0.001 wt% |
Specific heat，liquid@25℃ | 1.013 kJ/kg ℃ |
Specific heat capacity at room temperature@25℃,1atm | 0.0733m3/kg (1.175ft3/lb). |
Saturated liquid density（25℃） | 1.60 g/ml |
Vapor pressure（25℃） | 0.404 bar |
Insulating property (110k) | 3.8mA (Standard leakage current≤10mA) |
Dielectric strength (kV) | 74.6 kV (Test distance 3mm) |
ODP | 0 |
GWP | 1.0 |
ALT(year) | 0.014 |
◆Certificate:
◆Concentrations & safety margins comparison:
◆Environmental parameters comparison:
Noah®5112 | Halon1301 | HFC-227ea | HFC-236fa | |
ODP | 0 | 12 | 0 | 0 |
GWP | 1 | 6900 | 3800 | 9400 |
ALT(year) | 0.014 | 65 | 36.5 | 226 |
When to install the fire suppression system
Once you've selected a system and created a design, you're ready to install. Installation is done by authorized resellers, application engineers or trained end users. The time to install a fire suppression system depends on the complexity of the system and the equipment being protected. The installation of the pneumatic system usually takes about 4 hours, and the installation of the electrical system usually takes 16 hours. Time varies depending on the complexity of the installation, the components used, and the type of system being installed. Electrical systems have longer installation times due to electrical wiring and wiring, unlike pneumatic-only detection systems that do not require a power source or backup battery to activate. We will review the installation of a typical pneumatic fire suppression system.
Hot Tags: eco friendly fk5112 fire suppression agent, China, suppliers, manufacturers, in stock, made in China